BMessenger

Derived from: none

Declared in: be/app/Messenger.h

Library: libbe.so

Allocation: Stack or constructor

Summary

A BMessenger represents and sends messages to a message target, where the target is a BLooper and, optionally, a specific BHandler within that looper. The target can live in the same application as the BMessenger (a local target), or it can live in some other application (a remote target).

BMessenger's most significant function is SendMessage(), which sends its argument BMessage to the target.

For a local target, SendMessage() is roughly equivalent, in terms of efficiency, to posting a message directly to the BMessenger's target (i.e BLooper::PostMessage()).

The global be_app_messenger BMessenger pointer, which targets be_app's main message loop, is automatically initialized for you when you create your BApplication object. You can use it wherever BMessengers are called for.

Constructor and Destructor

BMessenger()

	BMessenger(const BHandler *handler,       const BLooper *looper = NULL,       status_t *error = NULL) BMessenger(const char *signature,       team_id team = –1,       status_t *error = NULL) BMessenger(const BMessenger &messenger) BMessenger(void)

Creates a new BMessenger and sets its target to a local looper/handler, to the (running) application identified by signature or team, or to the target of some other messenger.

• Looper/handler. To target a looper, supply a looper and pass a NULL handler. When the messenger sends a message, the message will be handled by looper's preferred handler. If you want the message to be sent to a specific handler within a looper, supply a handler and pass a NULL looper. The handler must already be attached to a looper, and can't switch loopers after this BMessenger is constructed.

• Signature or team. If you supply a signature but leave team as –1, the messenger targets an app with that signature. (The app must already be running; in the case of multiple instances of a running app, the exact instance is indeterminate) If you supply a team but no signature, you target exactly that team, regardless of signature. By supplying both a team and a signature, you can specify a specific instance of an app. In this case, team must be an app that has the proper signature.

  Messages sent to a remote target are received and handled by the remote application's BApplication object.

The BMessenger doesn't own its target.

RETURN CODES

The constructor places an error code in error (if provided).

• B_OK. The target was properly set.

• B_BAD_VALUE. The application identified by signature couldn't be found, or both handler and looper are invalid.

• B_BAD_TEAM_ID. Invalid team.

• B_MISMATCHED_VALUES. team isn't a signature app, or handler is associated with a BLooper other than looper.

• B_BAD_HANDLER. handler isn't associated with a BLooper (

~BMessenger()

	~BMessenger()

Frees the BMessenger; the target isn't affected.

Member Functions

IsTargetLocal() see Target()

IsValid()

	bool IsValid(void) const

Returns true if the target looper, whether local or remote, still exists.

This function doesn't tell you whether the looper is actually ready to receive messages, or whether the handler (if it was specified in the constructor) exists. In other words, a valid BMessenger is no guarantee that a message will actually get to the target.

LockTarget() , LockTargetWithTimeout()

	bool LockTarget(void) const status_t LockTargetWithTimeout(bigtime_t timeout) const

These functions apply to local targets only.

These functions attempt to lock the target looper in the manner of the similarly named BLooper functions (see BLooper::LockTarget()). In addition to the error codes reported there, these functions return false and B_BAD_VALUE (respectively) if the target isn't local, or if the looper is otherwise invalid.

SendMessage()

status_t SendMessage(BMessage *message,       BMessage *reply,       bigtime_t deliveryTimeout = B_INFINITE_TIMEOUT,       bigtime_t replyTimeout = B_INFINITE_TIMEOUT) const status_t SendMessage(BMessage *message,       BHandler *replyHandler = NULL,       bigtime_t deliveryTimeout = B_INFINITE_TIMEOUT) const status_t SendMessage(BMessage *message,       BMessenger *replyMessenger,       bigtime_t deliveryTimeout = B_INFINITE_TIMEOUT) const status_t SendMessage(uint32 command, BMessage *reply) const status_t SendMessage(uint32 command, BHandler *replyHandler = NULL) const

Sends a copy of message (or a BMessage based on a command constant) to the object's target. The caller retains ownership of message. The function doesn't return until the message has been delivered; if you're sending a message (as opposed to a command constant) you can set a microsecond delivery timeout through deliveryTimeout.

The target can respond to the message:

• If you supply a reply BMessage, the response is synchronous, with an optional timeout (replyTimeout) that starts ticking after the original message has been delivered. If the response times out, or the target deletes the original message without responding, the reply–>what is set to B_NO_REPLY. The caller is responsible for allocating and freeing reply. message and reply can be the same object.

Use caution when requesting a synchronous reply: If you call SendMessage() from the target looper's thread, you'll deadlock (or, at best, time out).

• If you supply a reply target (replyMessenger or replyHandler), the response is asynchronous, and is sent to the reply target.

• If you supply neither a reply message nor a reply target, the target's response is sent to be_app_messenger.

RETURN CODES

B_OK. The message was delivered (and the synchronous reply was received, if applicable).

• B_TIMED_OUT. deliveryTimeout expired; the message never made it to the target.

• B_WOULD_BLOCK. You requested a 0 deliveryTimeout, and the target's message queue is full.

• B_BAD_PORT_ID. The messenger's target is invalid, or the reply port was deleted while waiting for a reply (synchronous response requests only).

• B_NO_MORE_PORTS. You asked for a synchronous reply, but there are no more reply ports.

If you specified a handler when you constructed your BMessenger, and if that handler has since changed loopers, SendMessage() won't deliver its message, but it doesn't complain (it returns B_OK).

Target() , IsTargetLocal() , Team()

	BHandler *Target(BLooper **looper) const bool IsTargetLocal(void) const inline team_id Team(void) const

Target() returns the BMessenger's handler (directly) and looper (by reference in looper). This function only works for local targets. If Target() returns NULL, it can mean one of four things:

• The target is remote; looper is set to NULL.

• The BMessenger hasn't been initialized; looper is set to NULL.

• The handler is the looper's preferred handler; looper will be valid.

• The handler has been deleted; looper will be valid given that it hasn't been deleted as well.

IsTargetLocal() returns true if the target is local. Team() returns a target's team.

Team() see Target()

Operators

= (assignment)

	BMessenger &operator =(const BMessenger&)

Sets the left-side BMessenger's target to that of the right-side object.

== (equality)

	bool operator ==(const BMessenger&) const

Two BMessengers are equal if they have the same target.